To clean the Logitech MX Master 3, use a slightly damp cotton swab to remove dirt around the eye. Be careful not to apply too much pressure or rub too hard.
Additionally, you can apply a mild cleaning solution or rubbing alcohol to a cotton swab to clean the edges and crevices of the thumb wheel. Avoid using cleaning solutions that contain harsh chemicals.
Credit: blog.logitech.com
Cleaning The Exterior
To clean the Logitech MX Master 3, start by focusing on cleaning the exterior. For the scroll wheel assembly, you can remove the wheel assembly and pay attention to the small spring sticking from the bottom of the assembly. Make sure to use a slightly damp cotton swab or a cotton swab lightly moistened with a mild cleaning solution or rubbing alcohol to clean out any dirt or grime that may have accumulated around the eye or in the edges and crevices of the thumb wheel. Be careful not to press too hard or rub too much to avoid damaging the components.
To clean the rubber grip, use a soft, lint-free or microfiber cloth along with a mild cleaning solution. It is important to avoid using cleaning solutions that contain harsh chemicals or abrasive substances that could potentially damage the rubber. Instead, opt for a gentle solution to ensure that the rubber grip remains in good condition. Remember to wipe the rubber grip gently but thoroughly, removing any dirt or residue. Once cleaned, allow the Logitech MX Master 3 to fully dry before using it again.
Credit: www.reddit.com
Disassembling The Mouse
Unscrewing the Mouse: To begin disassembling the Logitech MX Master 3, you first need to unscrew the mouse. There are several screws that hold the mouse together, which need to be removed using a suitable screwdriver. Make sure to keep track of the screws, as you'll need them later for reassembly.
Removing the Power Cable: Once the mouse is unscrewed, you can start removing the power cable. This can easily be done by detaching the connector from the mouse's internal circuit board. Be careful when handling the cable to avoid any damage.
Detaching Metal Wheel: After removing the power cable, the next step is to detach the metal wheel. This can be done by carefully lifting it out of the mouse body. Take extra caution during this step to avoid bending or damaging the wheel.
Now that you have disassembled the Logitech MX Master 3, it's time to clean the different components. Use a slightly damp cotton swab or a lint-free cloth lightly moistened with a mild cleaning solution or rubbing alcohol to clean the edges, crevices, and rubber grips of the mouse. Avoid using cleaning solutions that contain harsh chemicals.
After cleaning, reassemble the mouse by following the disassembly steps in reverse order. Make sure all components are properly aligned before tightening the screws. Once reassembled, your Logitech MX Master 3 will be clean and ready to use again.
Credit: www.reddit.com
Frequently Asked Questions On How To Clean Logitech Mx Master 3
How Do I Clean My Mx Master S3?
To clean your MX Master s3, use a slightly damp cotton swab to remove dirt around the eye. Avoid applying too much pressure. You can also use a cotton swab with a mild cleaning solution or rubbing alcohol to clean the edges and crevices of the thumb wheel.
How Do I Clean My Logitech Mouse?
To clean your Logitech mouse, use a slightly damp cotton swab to remove dirt around the optical sensor. Be careful not to press too hard or rub too much. You can also clean the edges and crevices of the scroll wheel with a cotton swab lightly moistened with a mild cleaning solution or rubbing alcohol.
Gently wipe the rubber grip with a soft, lint-free cloth using a mild cleaning solution. Avoid using solutions that contain harsh chemicals.
Is Mx Master 3s Durable?
Yes, the Logitech MX Master 3S is durable and built to last. Its high-quality construction ensures longevity and reliability.
How Long Does Mx Master 3s Last?
The MX Master 3S can last for a long time.
Conclusion
To keep your Logitech MX Master 3 mouse in pristine condition, it's essential to clean it regularly. Use a damp cotton swab with a mild cleaning solution or rubbing alcohol to clean the edges and crevices of the thumb wheel.
Be gentle and avoid pressing too hard or rubbing too much. Additionally, use a soft, lint-free or microfiber cloth and a mild cleaning solution to clean the rubber grip. By maintaining the cleanliness of your mouse, you will ensure its optimal performance and longevity.
Happy cleaning!
